Aspire Archon 150W TC MOD
150W Aspire Archon TC MOD W/O Battery
Aspire Archon, powered by 2 x 18650 batteries, is a new powerful MOD with max 150W output. You can customize the logo and firing button profiles with just a few clicks. The Archon also features child lock, upgradable firmware and one button switch between VW and TC modes. Moreover, magnetic battery cover and nice ergonomic design add more fun of the vaping. Aspire Archon is the right device for your to have a easy vaping. Three colors for your selection.
Size: 88 (H) x 23 (W) x 50mm (L)
Voltage Range: 0 - 8.5V
Power Range: 1 - 150W
TEMP Range: 200 - 600F/ 100 - 315℃
Resistance Range: 0.05ohm - 3.5ohm
Modes: VW/VV/Bypass/Temp-Ti/Temp-Ni/Temp-SS/TCR(M1,M2, M3)
Thread: Spring loaded 510 thread
Display: 0.86 OLED inch
Charging port: Micro USB port
Battery: 2 x 3.7V 18650 batteries (not included)
Archon comes with
- 1 x Aspire Archon MOD
- 1 x Micro USB Cable
- 1 x User Manual
- 1 x Warranty Card
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
- You can buy 18650 batteries to work with it.
- 510 thread
Logo customization & child lock
Customizable firing button profiles (CFBP)
One button selection between wattage and Temperature modes,
Magnetic battery cover
Nice ergonomic design
Adjust fire time: The preset continuous fire time is 10 seconds, after 10 seconds continuous vaping, the mod will stop firing and the display will flash "10s". Users can adjust the fire time from 5s t0 15s by pressing "+” /"-" button.
CFBP: Press W button to select VW, VV, Bypass, C1, C2 and C3. C1, C2 and C3 are CFBP. Under CFBP, users can customize power curves to create their preferred taste. When the fire button is held down, the screen will display the power curve you have just have preset. User can set the wattage for each second if needed. While in CFBP, press the W button 1.5s will bring you to CFBP interface. While in CFBP setting interface, press W or T button to set time, press "+" button to increase wattage, press "-" button to decrease wattage. To save setting, simply press the fire button.
Charging: Connect the Archon to the charger and the screen will show a flashing battery icon. When the battery charge reaches to 4.2v or is fully charged, the mod will stop charging and the screen will remain off. The maximum current can reach up to 2A.
3 months for Archon MOD. Please check guarantee policy.
Our images are copyrighted. It is forbidden to reprint without our permission.